UZOPI Mavic Mini Air Pro Platinum Spark Accessories Tablet Holder –...
1Pc Original Gimbal Camera UV Lens Glass For DJI Mavic Pro
DJI Mavic Air 2 Part Gimbal Camera Video Transmission Signal Cable...
Total weight of 2.3 kg (5.07 lb.) Support cameras up to 3.6 kg (8 lb.) Precision of Control: ±0.02° Tool-Less Balance Adjustment System Transmitter for Remote Pan/Tilt Control Silent mode for quiet operation USB and Power Tap Power Outputs Assistant Software for iOS and Windows Bluetooth Wireless Interface for Setup
PRODUCT HIGHLIGHTS *Supports Cameras up to 16 Pounds*Precision of Control: ±0.02°*Transmitter for Remote Pan/Tilt Control*Tool-Less Balance Adjustment System*Assistant Software for iOS and Windows*Bluetooth Wireless Interface for Setup*15mm Rods + Mount Points for Accessories*USB and PowerTap Power Outputs*Gimbal Tuning Stand Included*Included Hard Case...
The DJI Intelligent Battery was specially designed for the Ronin-M/Ronin-MX. It has a capacity of 1580mAh, a voltage of 14.4V, and a variety of power management functions. When fully charged, it has a maximum run-time of three hours.
The Intelligent Battery for the Ronin series is easy to install and simple to charge with the Ronin 57W Battery Charger. The expected battery life is 6 hours.
Easily mount accessories or external monitors to your Ronin-M/Ronin-MX. 1/4" and 3/8" thread mounting holes.
With the Mobile Device Holder, you can mount your smartphone or tablet on your Ronin-M/Ronin-MX/Ronin and watch a live HD view from your camera as you operate the gimbal. Devices up to 170mm in width can be mounted, including the iPad Air. The holder can only be used with the Ronin-M - Monitor/Accessory Mount or Ronin - Monitor Mounting Bracket A.
Extends the Vertical Adjustment Arms, located on both sides of the camera base plate, by 30mm. Most helpful when using cameras exceeding 195mm in height.
Secures your camera onto the Ronin-M gimbal. Please choose the correct type of screw based on your camera model.
The Len Support Mount secures your camera lens when mounted on the Ronin-M and further increases video stablility. Supports various types of lenses.
This lanyard lets you off-load the weight of the remote controller when flying. Compatible with the Phantom 4, Phantom 3 series, Inspire 1 series and Ronin series.
This lanyard lets you off-load the weight of the remote controller when flying. Compatible with the Phantom 4, Phantom 3 series, Inspire 1 series and Ronin series.
Used to hold the Ronin-M in position. Can also be used as a carrier when transporting the Ronin-M. Extendable to a maximum height of 495mm.