HIGH PERFORMANCE CAMERAShoot sharp, clean video in up to 4K at 30fps and...
Lcfun - Encendedor *Encendedor impermeable al aire libre a prueba de...
What‘s Included With This Combo Matice 600 × 1Ronin-MX × 1
Compatible with DJI M600Supports RED EPIC, ARRI ALEXA Mini and more camerasDesigned for stability in high G-force environments5 minute set-upProfessional 3-axis handheld stabilization3 modes of operation: Upright, Underslung, BriefcaseAuto Tune Stability (ATS) for rapid balancingSmoothTrack™ movement smoothing
Hold a Ronin-M or Ronin-MX more easily and lean it against vertical surfaces when not in use. Also useful for different carrying styles and passing the Ronin between camera operators. Expansion screws available for personal optimization.
The DJI Intelligent Battery was specially designed for the Ronin-M/Ronin-MX. It has a capacity of 1580mAh, a voltage of 14.4V, and a variety of power management functions. When fully charged, it has a maximum run-time of three hours.
The Intelligent Battery for the Ronin series is easy to install and simple to charge with the Ronin 57W Battery Charger. The expected battery life is 6 hours.
The DJI SRW-60G is a short range wireless video link, which can transmit real time HD video or images for up to 10 meters. Containing both a transmitter and a receiver, it is not only suited for the Ronin-MX and Matrice 600, but can also be used with the Ronin series of handheld gimbals. Convenient video transmission in a meeting room or at home are also...
One end features a straight plug HDMI A plug and the other an HDMI D angled plug. It is used to connect a camera via HDMI D, such as Panasonic GH4 or Sony A7, to the SRW-60G Transmitter. Cable length 80cm.
Both ends feature straight plugs. Used to connect cameras with HDMI A ports, such as the RED series, to the SRW-60G Transmitter. Cable length 80cm.
One end features straight HDMI A plug and the other an angled HDMI C plug. It is used to connect cameras with HDMI C ports, such as Canon 5D or Panasonic GH3, to the SRW-60G Transmitter. Cable length 80cm.
The DJI Remote Start/Stop is designed to be used with a Ronin series gimbal or DJI Focus to control the camera for video recording or taking photos.When using the Remote Start/Stop with the Ronin-MX and Matrice 600, press the Shutter button or the Video Recording button to take photos or record video.
Used to connect the DJI Focus motor to the DJI Remote Start/Stop,this cable provides power and signal communication from the DJI Focus motor to the DJI Remote Start/Stop, so that you can take photos or record video using the DJI Focus.
RSS Control Cable for Panasonic is used to connect Remote Start/Stop Camera Port to Panasonic cameras.