This tiny yet brilliantly designed Micro-Quad features an integrated PCB frame, Simply bolt on the motors then solder your choice of 6amp ESC directly to the frame!

An integrated power distribution system is also included making for one of the neatest electronics installs around. All mounting hardware and frame components are included in the kit. All you will require to have this little monster in the air is four Turnigy T1811-2900kv motors, four 6Amp ESCs, a set of 5×3 Micro-quad props (2 Clock wise and 2 counter clockwise) an 800mah 2s 7.4v Lipoly battery, a HobbyKing Multi-rotor control board and your own transmitter and receiver (Tx/Rx).

Features:

Light weight design.
Integrated PCB for component installation.
Included a full set of frame and mounting hardware.

Specs:

Flying Weight: 145g (not including RX and battery)
Width: 250mm
Height: 85mm

Required:

4 x Turnigy T1811-2900kv
4 x 6Amp ESC
4 x 5×3 Prop (2CW & 2CCW)
1 x HobbyKing Multi-Rotor Control Board
1 x 800Mah 2s 7.4v Lipoly battery
16 x M2x8 Bolts (for motor)
16 x M2 lock nuts (for motor)
Your own radio and 4 channel receiver.